Water in Oil Monitors

Process Analyzers

| Water in Oil Monitors

NuFlo Watercut Monitor

The NUFLO Series 1000 Watercut Monitor is a solid state electronic instrument that determines the percent watercut in an oil emulsion without requiring the physical separation of the fluids. The capacitance probe technique employed by the Watercut Monitor allows the emulsion stream to be continuously surveyed. The frequency generated by the capacitance probe oscillator is determined by the watercut of the emulsion stream in the probe. The Watercut Monitor compensates for the non-linear relationship between frequency and watercut by strictly digital techniques. The result is a 4-20mA output signal which varies linearly with watercut. The 4-20mA output of the Watercut Monitor may be a completely floating signal because of the use of optoisolation circuitry. This mode of operation requires the optional isolating power supply board or the use of two external power supplies. The Watercut Monitor may be operated with a single external power supply if a floating output signal is not required.

Call or Email us for Detailed Pricing, Options, Specifications and Availability

Specifications
Prices Start at: $2,375.00

WCM 7300

Invalco Temperature Compensated Water Cut Monitor/Probe
Accurately measure trace amounts of water in flowing hydrocarbon steams.
Automatically compensate for reading changes caused by temperature variation of the flowing fluid.
Display the information on a LCD readout.
Provide an adjustable timed relay closure for control purposes and a 4-20 mA analog output for remote readout.
Call for Price and Availability - OEM and Resale Discounts

Categories

Water in Oil Monitors

Process Analyzers

NuFlo Watercut Monitor